RSS LG VX9900 enV
From PhoneNews.com Phone Encyclopedia Wiki
PhoneNews.com > Encyclopedia Home > LG > LG VX9900 enV
| VX9900 / enV Specifications
| |
| |
|---|---|
| Basics | |
| Manufacturer | LG |
| Networks | CDMA 800/1900 |
| Data Platform | 1xEVDO |
| FCC ID | BEJVX9900 |
| Size & Shape | |
| Weight | 4.6 oz |
| Dimensions | 4.64"x 2.08"x 0.78" |
| Form-Factor | horizontal Clamshell with internal antenna |
| Power | |
| Battery Life (Standby) | 460 hours (19.2 days) |
| Battery Life (Talking) | 270 minutes (4.5 hours) |
| Battery Type | Li-Polymer |
| Connectivity | |
| Application Platform | BREW 3.0 |
| Web / WAP Browser | Openwave WAP 2.0 |
| Sync Options | USB |
| Bluetooth | 1.2 |
| Bluetooth Profiles | HSP, HFP, DUN, OPP, DUN, FTP, A2DP, AVRC, BPP, HID |
| Data Ports | Serial, Bluetooth |
| Phone As Modem | Yes |
| GPS / LBS | gpsOne |
| Memory & Imaging | |
| Display Size | 1.4 inches (external) 2.2 inches (internal) |
| Resolution | 128x160 pixels (external) 320x240 (internal) |
| Display Type, Depth | 65K Color TFT LCD (external) 262K Color TFT LCD (internal) |
| Caller ID Display | Yes |
| Built-in Memory | |
| Memory Card Slot | microSD |
| Camera | 2.0 megapixel camera with video recorder and autofocus |
| Audio | |
| TTY/TDD | Yes |
| Hearing Aid Support | M3 |
| Audio Out/Headset Jack | 2.5 mm |
| Speakerphone | Yes |
| Interactivity | |
| Vibrate | Yes |
| Voice Dialing | Yes |
| SMS Text Messaging | Yes |
| MMS Multimedia Messaging | Yes |
| Text Entry Options | T9 |
| Miscellaneous | |
| Phone Book Capacity | 1000 |
| Tools | Calculator, Alarm, Calendar, Voice Memo |
Contents |
The LG VX9900 (titled by Verizon as the enV) features V CAST Video and Music, QWERTY keyboard, BREW application support, WAP browser, Bluetooth with stereo audio support, media player, microSD expansion slot, 2.0 megapixel camera with video recorder, and voice dialing.
Buy an enV from Amazon.com
[edit] Updates
Please check our Firmware Tracker for updates for this phone.
[edit] Downloads/Links
[edit] Codes
Note: Some Programming must be done from the internal keypad / QWERTY Keyboard.
OTA PROGRAMMING
Step 01:
Change ESN in billing system.
Step 02:
Power up the handset.
Step 03:
Dial *228 + SEND
Step 04:
Follow the VRU prompts USE OTA Where Available. If OTA is not available follow instructions below. Top
AKEY PROGRAMMING
Step 01:
Generate a random A-Key and power phone on.
Step 02:
With the flip CLOSED, press 2539 + * + * to access AKEY INPUT MODE.
Step 03:
Press 1 for Akey Entry
Step 04:
New AKEY displays, enter 26 digit A-key then press OK when complete. PROGRAMMING COMPLETE Top
QUICK PROGRAMMING
NOTE: Programming NAM 1 or 2 does not automatically set the phone to use NAM 1 or 2. Check NAM SELECT under Features to make sure what NAM the phone is using. Customer Service should be programming NAM 1 unless instructed otherwise.
With the flip OPEN, Power device Off then On, press Menu + 0 to access Programming Menu and continue to step 2 below.
Step 01:
With the flip OPEN, Power device Off then On, # # 7 7 6 4 7 2 6 9 9 0 0 + SEND to access Programming Menu
Step 02:
Service Code ?????? displays, enter 000000 (Service Programming Code - Default)
Step 03:
Press 1 for Service Prg.
Step 04:
ESN XXXXXXXXXXX displays, press OK.
Step 05:
Phone number (MDN) XXXXXXXXXX displays, enter the 10 digit MDN then press OK.
Step 06:
Phone number (MIN) XXXXXXXXXX displays, enter the 10 digit MIN then press OK.
Step 07:
NAM 1 Home SID XXXXX displays, enter SID without the zero´s in front (i.e. 20=CHI, 530=SBD) then press OK.
Step 08:
NAM 1 Name NAM1 displays, press Edit [Left SoftKey] or press OK.
Step 09:
NAM1 Completed Basic NAM1 is completed displays, press Exit [Left SoftKey].
Step 10:
Phone will power cycle PROGRAMMING COMPLETE Top
EXTENDED PROGRAMMING
NOTE: Programming NAM 1 or 2 does not automatically set the phone to use NAM 1 or 2. Check NAM SELECT under Features to make sure what NAM the phone is using. Customer Service should be programming NAM 1 unless instructed otherwise.
For older software versions may use:
With the flip OPEN, Power device Off then On, press Menu + 0 to access Programming Menu and continue to step 2 below.
Step 01:
With the flip OPEN, Power device Off then On, # # 7 7 6 4 7 2 6 9 9 0 0 + SEND to access Programming Menu
Step 02:
Service Code ?????? displays, enter 000000 (Service Programming Code - Default)
Step 03:
Press 1 for Service Prg.
Step 04:
ESN [XXXXXXXXXXX] displays, press OK.
Step 05:
NAM 1 Mobile Phone # [XXXXXXXXXX] displays, enter the 10 digit MDN then press OK.
Step 06: Phone number (MIN) XXXXXXXXXX displays, enter the 10 digit MIN then press OK. Step 07:
NAM 1 Home SID [XXXXX] displays, enter SID without the zero´s in front (i.e. 20=CHI, 530=SBD) then press OK.
Step 08:
NAM 1 Name [NAM1] displays, press Edit [Left SoftKey] or press OK.
Step 09:
NAM1 Completed [Basic NAM1 is completed] displays, press More [Right SoftKey]0.
Step 10:
Security Code [XXXXXX] displays, enter new 6 digit security code then press OK.
NOTE: Changing code to something other then 000000 may/may not be retrievable and interfere with OTA. Please advise customers to remember there new codes.
Step 11:
NAM1 MCC [310] displays, press OK.
Step 12:
NAM1 NMSID [00XXXXXXXXXX] displays, press OK.
Step 13:
NAM1 True IMSC MCC [310] displays, press OK.
Step 14:
NAM1 True IMSI NMSID [00XXXXXXXXXX] displays, press OK.
Step 15:
NAM1 PRL Enabled [Enabled] displays, press OK.
Step 16:
CDMA Home SID/NID [Index SID NID] displays, enter new XXX then press OK.
Step 17:
NAM1 CDMA Pri. CH A [283] displays, press OK.
Step 18:
NAM1 CDMA Sec. CH A [691] displays, press OK.
Step 19:
NAM1 CDMA Pri. CH B [384] displays, press OK.
Step 20:
NAM1 CDMA Sec. CH B [777] displays, press OK.
Step 21:
Lockout SID/NID [Index SID NID] displays, press OK.
Step 22:
NAM1 Home Sys Reg [Yes] displays, press OK.
Step 23:
NAM1 Forn SID Reg [Yes] displays, press OK.
Step 24:
NAM1 Forn NID Reg [Yes] displays, press OK.
Step 25:
NAM1 Acc Ovld Class [X] displays, press OK.
Step 26:
NAM2 Setting [NAM2 Setting] displays, press OK
or
Programming NAM2 Note: NAM2 will display on phone where NAM1 is displayed in the instructions.
SHORT PROGRAMMING press Edit and follow instruction under SHORT PROGRAMMING .
LONG PROGRAMMING press Edit and follow instruction under LONG PROGRAMMING
Step 27:
Phone Model [XX] displays, press OK.
Step 28:
Slot Cycle Index [X] displays, press OK. Phone will power cycle MANUAL PROGRAMMING COMPLETE
Top
WEB IP PROGRAMMING
With the flip OPEN, Power device Off then On, press Menu + 0 to access Programming Menu and continue to step 2 below.
Step 01:
With the flip OPEN, Power device Off then On, # # 7 7 6 4 7 2 6 9 9 0 0 + SEND to access Programming Menu
Step 02:
Service Code ?????? displays, enter 000000 (Service Programming Code - Default)
Step 03:
Select WAP Setting.
Step 04:
Select Proxy Address Setting.
Select Primary Address or Select Secondary Address.
Step 05:
Enter the 12 digit Proxy Addresss EG. gw.vzwwap.com
Step 06:
Press OK, press CLR
Step 07:
Select Proxy Port Setting.
Select Primary Port. 8080 Select Primary LXL Port. 0443 Select Secondary Port. 8080 Select Secondary LXL Port. 0443
Step 10:
Press END PROGRAMMING COMPLETE
